Products

Contact Person : Ms. Ma Mary
Company Name : Shenzhen Kapata Lighting Co., Ltd.
Tel : 0086-0755-81791822
Fax : 0086-0755-81791812
Address : Guangdong,Shenzhen,3rd Floor,A Building,Huilongda Industrial Park,Shuitian,Shiyan,Bao'an,Shenzhen ,P.R China
Country/Region : China
Zip : 518108

Newest!!! Rechargeable battey powered led floodlight Cree led (10W to100W)

<< Previous Product

Next Product >>

Product Detailed

Related Categories:Other Lights & Lighting Products

From 10W to 100 W ,battery powered Amercan CREE chip NEW automtive opened housing 3 years waranty ,60000h life CE ,ROHS

New housing finer floodlight Cree led 10W/20W/30W/50W/80W/100W

Battery powered rechargeable

From 10W to 100 W ,single color ,RGBAmercan CREE chipNEW automtive opened housing3 years waranty ,60000h lifeCE ,ROHS

Basic Technical Parameters

Rated power	10W
Power consumption	10±5W
Input voltage	AC 85~265V/50~60Hz
LEDquantity	4 PCS
LED light source	CREE
LED luminous efficiency	80-90lm/W
LED luminous flux	1000lm
Luminaire efficiency	>85%
Illumination uniformity	>0.8
Correlated Color Temperature	2700K-7000K
Color rendering index	Ra≥80
Beam Angle	55 º ,90º,120º
Degree of protection	IP66
Operating ambient temperature	-40°C~50°C
Storage ambient temperature	-40°C~50°C(30°Cthe best)
Lamp operating temperature	Ambient temperature	The Radiator surface of the lamp body	LED lights Pin
	25°C	55°C	60°C
Certificate	CE,RoHS
Lifespan	60000H
Dimensions	As specified in the product dimension drawings
Weight	0.76 kg

1) Energy-saving:The high power LED as light source, 80% energy saving than incandescent.

2) Environmental Protection: does not contain mercury, lead and hazardous substances, no environmental pollution, no infrared and ultraviolet to avoid harm to the human body, its green lighting products.

3) Long lifespan:The life of up to 50,000 hours or more.

4) The use of high-power bright LED group packages, and heat fixed one to make the product more solid and reliable, life assurance.

5) Input voltage of 85V-265V, makes products easier to use.

6) DC constant current driver, no flicker.

7) Direct optical illumination point than traditional lamps have higher light-use efficiency.

8) The main use of extrusion molding a unique heatsink with good thermal conductivity of aluminum (AL6063), has good heat dissipation, LED contact with copper thermal conductivity

No.	Item	Test methods	Through the standard
1	Temperature rise test	Ambient Temperature of 25°C, the lamp sureface temperature below 65°C, LED temperature below 75°C	Ambient Temperature of 25°C, the lamp sureface temperature below 65°C, LED temperature below 75°C
2	High temperature a nd pressure test	Ambient temperature of 60°C, enter the 1.1times rated voltage, light work 24hours	Lighting to work properly after the test
3	Low temperature and pressure test	Ambient temperature of -15°C, enter the 0.9 times rated voltage, light work 24hours	Lighting to work properly after the test
4	Vibration tests	Vibration velocity is set to 300rev/min, the amplitude is set to 2.54 cm, six sureface vibration test on the packaged product.	The lamps can not occur off parts, structural damaged, the lighting does not shine and other anomalies.
5	Impact test at room temperature	Ambient temperature of 25°C, lighting 30s, lighting -30s, cirdulation 10,000	The lamps can not occur leakage, not lit and electrical anomalies
6	Life test	Ambient temperature of 25 ° C, lit test, the first three months every 10 days, testing, optical parameters, three months after a month testing the optical parameters, 70% of the initial luminous flux for the life of the product, turn off the lights for the absolute life	Luminous flux for 90% of the initial luminous flux of 3000 hours, 30,000 hours of luminous flux should be greater than 70% of the initial luminous flux